Symmetrical Personal Training is the first Personal Training Center in Cyprus offering the highest quality and latest technology machines HYPOXI and ICOONE for targeted fat loss together with the POWER PLATE.
Flexible Casting and Coating Resin with high impact strength and abrasion resistance.
WEICON Urethanes are 2-component polyurethanes that cure at room temperature to tough rubber-like materials, remaining flexible at temperatures down to even -60°C.
WEICON Urethanes adhere to a variety of materials such as metals, concrete, rubber, wood, fibreglass and many others.
They are also suitable as flexible coatings in connection with WEICON Plastic Metal (epoxy) systems.
Due to their low sensitivity to humidity they can also be used for coatings in thin layers and have a remarkably high tensile and tear strength.
Foundry patterns and forms
For repairs on:
Solid rubber tyres
For coatings on:
Chutes and funnels
Dry and wet mixers
In addition, WEICON Urethanes are excellently suitable as vibration or insulation protection of machines.
Pretreatment of the surface
The surfaces must be clean, dry and degreased. Almost every surface soiling like oil, grease, dust and dirt can be removed with WEICON Surface Cleaner or WEICON Sealant and Adhesive Remover (old paint residues). If the surfaces are badly soiled or smooth, the adhesion can be optimized by sand-blasting with suitable grain size or by mechanical roughening.
The use of a primer can improve the adhesion on certain surfaces (for details see brochure).
Primer M 100
For non-absorbent materials like aluminium, steel, stainless steel, brass, zinc, tinplate, plastics like PA 6.6, GRP, PUR, lacquered surfaces, enamel, ceramic and coated glass.
Base: Solvent-containing synthetic resin
Density: 0.8 g/cm³
Consumption: approx. 20-40 ml per m²
Primer S 300
For porous and absorbent materials like wood, concrete, stone, etc.
Base: Solvent-containing polyurethane
Density 1.03 g/cm³
Consumption: approx. 200 ml per m²
Important Note: All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.